line post type composite insulator 35KV

1.rated voltage:35KV 2.confirm to GB/T19519-2004,JB/T8460-1996 3.certification:ISO9001 4.package: Carton 5.Offer OEM , ODM

 Introduction:

Polymer (Silicone) insulators are intended for use in highly contaminated areas, and are frequently located less than 50m from the coastline, sometimes directly exposed to salt spray for the ocean. 

 

 

 

Main Component:

1) Silicon Rubber for sheds/ housing 2) Glass-fiber reinforced epoxy resin rod (ECR type) for core. The axially aligned glass fiber reinforced resin rod that forms the mechanical load-bearing component of the insulator.  3) Hop dip galvanized cast steel for metal fittings. The insulator attachment hardware is connected to the core. 

 

Installation Ways:

Pin/Post insulators: any insulator intended to carry tension, torsion, bending or compression loads. It includes horizontal and vertical installation.

 

  

Technical  Parameter:

Model	Rated Voltage (Kv)	Rated Bending Load (kN)	Structure Height  (mm±10)	Insulation Distance (mm)	Minimum Creepage Distance (mm)	Min Lightning Full-wave Impulse Withstand Voltage (kVp)	1min Power-frequency Withstand Voltage (KV)
FZSW-10/4	10	4	215	140	311	75	42
FZSW-20/6	20	6	260	195	470	150	65
FZSW-35/6	35	6	450	378	926	185	95
FZSW-35/8	35	8	450	380	966	185	95
FZSW-66/6	66	6	760	634	1890	410	185
FZSW-66/8	66	8	760	630	2020	410	185
FZSW-110/8	110	8	1220	1070	3988	550	230
FZSW-110/10	110	10	1140	1030	3988	550	230
FZSW-220/8	220	8	2260	2200	7800	1050	395

 

 

 

Normal service conditions:

1.The ambient air temperature is no higher than +40 degree. no lower than -40 degree.

2.The altitude above sea level does not exceed 1500m

3.AC Power frequency does not exceed 100Hz

4.Maximum wind speed does not exceed 35m/s

5.The earthquake intensity does not exceed 7 degrees

 

 

Model Meanning: 

   

More pictures:

line post type composite insulator 35KV